Automatic Frame Gluing Machine & Junction Box Glue Machines for Solar Panel Production Line
Ooitech provides a complete range of gluing and sealant dispensing equipment for solar panel manufacturing, including the Automatic Frame Gluing Machine (SPZ-2400GS-T2-Y2), the Junction Box AB Component Filling Glue Machine (SPZ-AB10S-JH), and the Junction Box Gluing Machine (SPD-400). These machines are designed to handle critical adhesive application processes in solar module production lines ranging from 5MW to 1GW capacity.
The SPZ-2400GS-T2-Y2 Frame Gluing Machine is equipped with an American ARO glue supply pump and optional PCF glue flow control system to ensure uniform sealant application on aluminum frames before the framing process. The SPZ-AB10S-JH precisely mixes and dispenses A and B component glue into junction boxes with screw and gear metering accuracy. The SPD-400 Junction Box Gluing Machine offers programmable glue track dispensing for junction box sealing with high repeat positioning accuracy.
These machines are suitable for manufacturing PERC, TOPCon, IBC, ABC, HPBC, shingled, flexible, and various other solar panel types using G1, M6, M10, M12, and MBB cell formats.
Technical Parameters
Automatic Frame Gluing Machine SPZ-2400GS-T2-Y2
| Parameter | Specification |
|---|
| Model | SPZ-2400GS-T2-Y2 |
| Overall Dimensions | 3460mm x 3250mm x 2200mm (Platform height: 960 +/- 10mm) |
| Glue Pump Brand | American ARO |
| Max. Effective Glue Stroke | 2500mm |
| X Axis Repeat Positioning Accuracy | +/- 0.2mm |
| Max. No-load Running Speed | 700mm/s |
| Gluing Speed | 0-500mm/s (Adjustable) |
| Z Axis Lift Height | Cylinder stroke 75mm |
| Glue Distance | 0-99mm |
| Frame Specification Range | 800-1500mm / 1600-2700mm |
| Frame Width Range | 25-50mm |
| Glue Quantity Error | +/- 3% |
| Glue Efficiency | 24s/panel (Based on 2500mm x 1400mm) |
| Feeding Mode | One set frame (4 pieces) at a time, glue 1 piece each cycle |
| Applicable Glue | One-component 55-gallon barreled silica gel |
| Stability | Trouble-free operation rate >= 99% |
| Glue Supply Pressure | Dry compressed gas 0.5-0.6MPa |
| Power Supply | AC220V +/- 10%, 50Hz |
| Power Consumption | Less than 2KW |
| Temperature Range | 5-40 degrees Celsius |
| Humidity Range | Less than 85%, no condensation |
| Time for Changing Glue | <= 20min/barrel |
Frame Buffer (Optional): Can store 20-30 sets of frames (20 sets of 40mm frame / 26 sets of 30mm frame / 32 sets of 25mm frame)
PCF Glue Flow Control System (Optional)
| Parameter | Specification |
|---|
| Glue Line Diameter | 0-6mm (Adjustable) |
| Diameter Error | +/- 3% |
| Weight Error of Glue Line | +/- 3% |
| Key Component | GRACO PCF Electronic Closed-loop Feedback Control System |
Junction Box AB Component Filling Glue Machine SPZ-AB10S-JH
| Parameter | Specification |
|---|
| Model | SPZ-AB10S-JH |
| Power Requirement | 2PH 220V +/- 5%, 50Hz/60Hz, 1.2KVA |
| Air Pressure Source | Pressure > 5KG/CM2, Air Flow > 4L/min |
| Operation Environment | +10 to +30 degrees Celsius (Indoor), Humidity < 85% |
| A Component Barrel | 30L x 1 (With stirring) |
| B Component Barrel | 15L x 1 |
| Liquid Level Detection | Static capacitance induction type |
| Material Adding Method | Manual feed |
| Defoaming Method | Electric mixing or vacuum mixing |
| Metering Device | Screw (Component A: 6CC) and Gear (Component B: 1.2CC) |
| Proportion Accuracy | +/- 2% |
| Mixing Accuracy | +/- 3% |
| Proportional Adjustment Range | 10:1 to 4:1 |
| Glue Amount | 5CC |
| Control Method | PLC and HMI |
| Glue Out Mode | Continuous or quantitative |
| Glue-out Valve | Double liquid valve (Static mixing) |
| Max Air Input Pressure | 100psi (7bar, 0.7MPa) |
| Max Fluid Working Pressure | 300psi (20bar, 2MPa) |
| Max Glue Head Move Distance | 4 meters |
| Dimensions | 800mm x 950mm x 1850mm |
Junction Box Gluing Machine SPD-400
| Parameter | Specification |
|---|
| Model | SPD-400 (400ml/600ml Soft Sealant) |
| X, Y, Z Max. Stroke | 400mm x 400mm x 100mm |
| X, Y Max. Speed | 500mm/s |
| Z Max. Speed | 300mm/s |
| Repeated Positioning Accuracy | +/- 0.02mm |
| Overall Dimensions | 530mm x 530mm x 510mm |
| Weight | 40kg |
| Glue Size | 1-6mm (Adjustable) |
| Working Mode | Program teaching of glue track, one-key start |
| Track Storage | 99 files, 99 spots per file |
| Power Supply | AC220V +/- 15%, 50Hz |
| Air Pressure Requirement | Dry air 0.4-0.6MPa |
| Temperature Range | 5-40 degrees Celsius |
| Humidity Range | Less than 85%, no condensation |
| Power Consumption | Steady working not exceeding 200W |
Technical Advantages
Automatic Frame Gluing Machine SPZ-2400GS-T2-Y2
American ARO Glue Supply Pump: Premium imported ARO pump ensures stable and reliable glue delivery for consistent sealant application on aluminum frames.
Optional GRACO PCF Closed-loop Control: The electronic closed-loop feedback control system monitors outlet pressure and flow in real time, automatically adjusting rotational speed and pressure to maintain glue line uniformity within +/- 3% error.
High Efficiency Production: Completes gluing for a 2500mm x 1400mm panel in just 24 seconds, supporting high-throughput solar module production lines.
Anti-curing Glue Nozzle Design: The nozzle automatically immerses in silicone oil during standby and power failure conditions, preventing silicone curing and nozzle blockage.
No Glue Alarm System: Built-in alarm detects empty glue barrels and stops supply immediately, preventing air from entering the pipeline system.
Wide Frame Compatibility: Supports frame lengths from 800mm to 2700mm and widths from 25mm to 50mm, accommodating various solar panel sizes and configurations.
Optional Frame Buffer: Stores 20-30 sets of frames for continuous operation, reducing downtime between production cycles.
Pressure Balancer and Reducing Valve: Shanghai Shengpu original components combined with 10 years of debugging experience ensure high-quality glue line evenness.
Mobile Design: Equipped with casters and adjustable feet for flexible workshop positioning.
Junction Box AB Component Filling Glue Machine SPZ-AB10S-JH
Precise Dual-component Metering: Screw pump for Component A and gear pump for Component B deliver proportion accuracy of +/- 2% and mixing accuracy of +/- 3%.
Flexible Ratio Adjustment: Proportional adjustment range from 10:1 to 4:1 accommodates different junction box adhesive formulations.
PLC and HMI Control: Programmable logic controller with human-machine interface provides intuitive operation and parameter adjustment.
Vacuum Defoaming: Optional vacuum mixing for storage barrel eliminates air bubbles and ensures void-free adhesive application.
Static Mixing Technology: Double liquid valve with static mixing ensures thorough and consistent blending of A and B components.
Low Level Detection: Static capacitance induction sensors monitor material levels and alert operators when refilling is needed.
Junction Box Gluing Machine SPD-400
Ultra-high Positioning Accuracy: Repeat positioning accuracy of +/- 0.02mm ensures precise and consistent glue track application on every junction box.
Programmable Glue Track: Customized teaching editor allows operators to program complex glue paths with storage for up to 99 files.
Adjustable Glue Size: Glue diameter adjustable from 1mm to 6mm to match different junction box sealing requirements.
Compact and Portable: Lightweight 40kg design with small footprint (530mm x 530mm x 510mm) fits easily into any production layout.
Flexible Fixture Options: Standard single junction box fixture and optional 3-separate junction box fixture available for different production needs.
Product Applications
The Ooitech automatic frame gluing machine and junction box glue machines are essential equipment in solar panel production lines, serving critical roles in module assembly and sealing processes.
Frame Gluing Applications
The SPZ-2400GS-T2-Y2 automatic frame gluing machine is used to apply sealant to aluminum frames before the framing process in solar panel assembly. It is compatible with a wide range of panel sizes and frame specifications, making it suitable for:
Standard residential solar panels (60-cell and 72-cell formats)
Large-format commercial and utility-scale solar modules (M10, M12 half-cut configurations)
MBB (Multi-Busbar) solar panel production lines
PERC, TOPCon, IBC, ABC, HPBC, and shingled solar module manufacturing
Bifacial solar panel production with glass-glass or glass-backsheet structures
Thin film solar panel framing applications
Junction Box Gluing Applications
The SPZ-AB10S-JH AB component filling machine and SPD-400 junction box gluing machine handle adhesive application for junction box assembly, including:
Potting and encapsulation of junction boxes with two-component adhesive for waterproof sealing
Single junction box and split (3-separate) junction box configurations
Solar module production lines from 5MW to 1GW capacity
Compatible with various junction box designs for mono-facial and bifacial modules
Production Line Integration
These gluing machines integrate seamlessly into complete Ooitech solar panel production lines alongside laser cutting machines, tabber stringers, layup machines, bussing machines, EL testers, laminators, framing machines, IV testers, and sun simulators.
Warranty and After-sales Service
One year warranty after successful installation or 16 months from Bill of Lading date, whichever is earlier.
Free maintenance services and necessary spare parts during the warranty period (consumables and courier costs excluded).
On-site engineer support available during warranty if remote troubleshooting cannot resolve the issue (travel and accommodation costs covered by buyer).
Warranty does not cover damage from misuse, unauthorized modification, or operation inconsistent with the manual.
After warranty expiration, Ooitech continues to provide free online technical support and spare parts at favorable prices.
Consumable parts are available upon payment at any time.
Contact Ooitech to Get a Quote
Ooitech, founded in 2013, is a professional turnkey solar energy solution provider with over 10 years of experience in the PV industry. Our solar panel production line equipment has been exported to Poland, Hungary, Korea, Mexico, Egypt, Algeria, India, Saudi Arabia, Syria, Kazakhstan, and many other countries worldwide.
Our turnkey solutions include:
5MW to 1GW solar module production line supply
Traditional PV line upgrade to newest MBB production line
Factory construction consultation and facility layout design
Raw material selection guidance
Production procedure assistance and solar power station installation support
Welcome to visit our YouTube channel for more solar panel production line videos and factory information: www.youtube.com/ooitech
Watch our MBB Full Automatic Solar Panel Production Line Video: https://www.youtube.com/watch?v=uRS9sn94sIQ
Download Ooitech Product Catalogue: https://drive.google.com/file/d/1EWA3TV6hJb_cAUH6w0UENpRglAgq_Kzv/view?usp=sharing
Download Ooitech Company Profile: https://drive.google.com/file/d/1yg9NLXzLOmPWriYScQZeM6ZfSZ8gcQ88/view?usp=sharing
Get in Touch with Ooitech Today:
Contact us now for detailed quotations, customized production line solutions, and professional technical consultation for your solar panel manufacturing project.
