Solar Panel Tester Sun Simulator GIV-20A2616 Overview
The Gsolar GIV-20A2616 Solar Panel Tester / Sun Simulator is a professional-grade A+A+A+ class solar module IV testing system designed for accurate electrical performance measurement of a wide range of photovoltaic modules. With a maximum illuminated area of 2600mm x 1600mm and an adjustable long pulse duration from 10ms to 100ms, this sun simulator delivers highly precise IV curve testing for crystalline silicon, thin film, PERC, HIT, HJT, N-type, IBC, shingled, half-cell, and LRF/LHS ribbon-based solar modules.
Powered by proprietary GSN technology, the GIV-20A2616 achieves single-flash measurement that effectively eliminates the capacitance effect commonly found in high-efficiency and high-capacitance PV modules, ensuring reliable and repeatable test results across all advanced cell technologies. This makes it an ideal testing solution for modern solar panel production lines producing next-generation modules.
Ooitech supplies the Gsolar GIV-20A2616 sun simulator as part of comprehensive solar panel production line solutions, ranging from 5MW to 1GW capacity. Whether you are setting up a new production facility or upgrading your existing quality control station, this tester provides the accuracy and throughput needed for professional module manufacturing.
Technical Specifications
Core Performance Parameters
| Parameter | Specification |
|---|
| Model | GIV-20A2616 |
| Classification | A+A+A+ Class |
| Max. Illuminated Area | 2600mm x 1600mm |
| Lamp Type | Xenon Lamp |
| Lamp Lifetime | 60,000 flashes (standard); ≥100,000 flashes at 10ms pulse duration |
| Spectrum Range | 300-1200nm (extendable to 1700nm) |
| Spectrum Match | 0.875-1.125 (A+ Class) |
| Light Intensity Range | 700-1200 W/m² |
| Temporal Instability of Irradiance | < 1% (A+ Class) |
| Non-uniformity of Irradiance | < 1% (A+ Class) |
| Pulse Duration | 10ms - 100ms, adjustable in steps of 10ms |
| Measurement Type | Single Flash |
| Sweep Type | Isc-Voc or Voc-Isc |
| Repeatability Error | < 0.3% at 40 continuous tests; < 0.5% at 100 continuous tests |
| Sunny Face Orientation | Sideways |
| Application Mode | Offline |
Measurement Range and Resolution
| Parameter | Range | Resolution |
|---|
| Voltage | 1V, 4V, 10V, 70V, 200V | 0.003% |
| Current | 2A, 4A, 15A, 25A, 40A | 0.003% |
Cycle Time Performance
| Pulse Duration | Cycle Time |
|---|
| 10ms | ≤ 5 seconds |
| 100ms | ≤ 30 seconds |
Calibration Capabilities
| Calibration Type | Supported |
|---|
| Pmax Calibration | Yes |
| Isc Calibration | Yes |
| Voc Calibration | Yes |
| Module Temperature Calibration | Yes |
| Room Temperature Calibration | Yes |
Physical Specifications
| Parameter | Specification |
|---|
| Dimensions | 3000mm x 2000mm x 5030mm |
| Power Supply | 220V ± 10%, 25A, 50Hz |
| Standard Configuration | Tester + PC + Display Screen + Software + IR Temperature Sensor + Mouse + Keyboard |
Measured Parameters (Auto Saved and Auto Displayed)
| No. | Parameter | Index | Auto Save | Auto Display |
|---|
| 1 | I-V Curve | - | Yes | Yes |
| 2 | P-V Curve | - | Yes | Yes |
| 3 | Sun Intensity Monitoring | - | Yes | Yes |
| 4 | Short Circuit Current | Isc | Yes | Yes |
| 5 | Open Circuit Voltage | Voc | Yes | Yes |
| 6 | Current Density | Jsc | Yes | Yes |
| 7 | Maximum Power | Pmax | Yes | Yes |
| 8 | Efficiency | Eff | Yes | Yes |
| 9 | Fill Factor | FF | Yes | Yes |
| 10 | Current at Max Power | Ipm | Yes | Yes |
| 11 | Voltage at Max Power | Vpm | Yes | Yes |
| 12 | Series Resistance | Rs | Yes | Yes |
| 13 | Shunt Resistance | Rsh | Yes | Yes |
| 14 | Environment Temperature | EnvTemp | Yes | Yes |
| 15 | Reference Cell Short Current | StdIsc | Yes | Yes |
| 16 | Reference Cell Temperature | RCTemp | Yes | Yes |
| 17 | Module Back Temperature | Tmod | Yes | Yes |
| 18 | Other Specific Parameters | Custom | Yes | Yes |
Facility Requirements
| Item | Requirement |
|---|
| Operating Temperature | 10-30 C |
| Ideal Temperature | 25 +/- 2 C |
| Humidity | 40-60% RH |
| Maximum Power Consumption | 5 KW |
| Rated Power Consumption | 3 KW |
| Compressed Air | 0.6-0.8 MPa (800 L/min) |
| Earthing/Grounding | Required |
| Corrosive Gas Environment | Not Allowed |
Technical Advantages
A+A+A+ Class Measurement Excellence
The GIV-20A2616 achieves the highest A+A+A+ classification across all three critical parameters: spectrum match, temporal instability, and spatial non-uniformity of irradiance. This ensures that every measurement meets and exceeds the strictest international standards for solar module testing accuracy.
GSN Technology for High-Capacitance Module Testing
The proprietary GSN technology enables single-flash measurement with adjustable pulse durations from 10ms to 100ms. This effectively eliminates the capacitance effect that causes inaccurate readings in high-efficiency modules such as PERC, N-type, IBC, and HJT cells. For HJT modules specifically, a 30ms pulse duration delivers highly accurate IV property measurements, solving one of the most challenging testing requirements in modern PV manufacturing.
Extended Spectrum Coverage
With a standard spectrum range of 300-1200nm and the option to extend to 1700nm, the GIV-20A2616 accommodates the testing requirements of virtually all photovoltaic technologies, including advanced thin-film and heterojunction modules that require broader spectral coverage.
Ultra-High Repeatability
Repeatability error is kept below 0.3% over 40 continuous tests and below 0.5% over 100 continuous tests, ensuring consistent and reliable quality control throughout high-volume production runs.
Comprehensive Software Platform
Multi-level access control: Separate login accounts for QC personnel, operators, technicians, and maintenance staff with customizable permission settings for each role
Advanced module classification: Automatically sort modules into different grades based on Pmax, efficiency, Imax, I-Id, or any combination of parameters
Flexible data export: Support for MDB, CSV, and JPG formats with the ability to save both calibrated and original measurement data
Real-time monitoring: Live light intensity monitoring throughout the testing process ensures consistent test conditions
Large Testing Area with Fast Throughput
The 2600mm x 1600mm illuminated area accommodates all standard and large-format solar modules. With cycle times as low as 5 seconds at 10ms pulse duration, the system supports high-throughput production line requirements without compromising measurement quality.
Universal Module Compatibility
The GIV-20A2616 is engineered to test the full spectrum of solar module technologies including crystalline silicon, thin film, PERC, HIT, HJT, N-type, IBC, TOPCon, shingled, half-cell, and modules using high-transparency EVA, LRF ribbon, and LHS ribbon configurations.
Long Xenon Lamp Lifespan
The xenon lamp delivers up to 100,000 flashes at 10ms pulse duration, significantly reducing consumable costs and maintenance downtime over the lifetime of the equipment.
Product Applications
Solar Panel Production Line Quality Control
The GIV-20A2616 serves as the essential final-stage quality control station in solar panel manufacturing lines ranging from 5MW to 1GW capacity. It provides precise electrical performance verification to ensure every module leaving the production line meets specified power output and efficiency ratings. Production facilities manufacturing M6, M10, M12, and other cell formats rely on this tester for accurate power binning and module classification.
High-Efficiency Module Manufacturing
With GSN technology and long pulse capability, this sun simulator is specifically optimized for production lines manufacturing next-generation high-efficiency modules including PERC, TOPCon, HJT, IBC, ABC, and HPBC technologies. The adjustable pulse duration from 10ms to 100ms ensures accurate readings regardless of the cell technology's capacitance characteristics.
Shingled and Half-Cell Module Production
The system provides accurate testing for advanced module architectures including shingled modules and half-cell configurations. These module designs present unique testing challenges due to their interconnection methods, and the GIV-20A2616's flexible measurement capabilities ensure precise IV characterization.
Thin Film and BIPV Module Testing
With the extendable spectrum range up to 1700nm, the GIV-20A2616 accommodates thin film technologies including CIGS and CdTe modules, as well as building-integrated photovoltaic (BIPV) products that may use non-standard module formats.
Research and Development Laboratories
R&D facilities developing new cell technologies and module configurations benefit from the high measurement resolution (0.003% for both voltage and current) and comprehensive parameter output, providing detailed electrical characterization data for product development and optimization.
Third-Party Testing and Certification
Independent testing laboratories and certification bodies can utilize the A+A+A+ class accuracy and extensive calibration capabilities to perform reliable module performance assessments in compliance with international testing standards.
Contact Ooitech to Purchase
Ooitech is your trusted partner for complete solar panel production line solutions, from individual equipment like the Gsolar GIV-20A2616 Sun Simulator to fully integrated production lines with capacities from 5MW to 1GW. We provide not only equipment supply but also production process training, raw material sourcing, installation support, and comprehensive after-sales service.
Whether you need a standalone solar module IV tester for quality control or a complete MBB automatic solar panel production line, our experienced team is ready to provide customized solutions tailored to your production requirements.
Get in Touch with Ooitech:
Useful Resources:
Contact us today for a detailed quotation and technical consultation on the Gsolar GIV-20A2616 Solar Panel Tester or any other solar panel production line equipment. Our team is available to assist you in building a world-class solar module manufacturing facility.
