{
    "schemaVersion": "ooitech-article.v1",
    "url": "https://www.ooitech.com/pinholes-in-topcon-cells-the-surprising-path-to-26-55-efficiency.html",
    "language": "en",
    "title": "Pinholes in TOPCon Cells: The Surprising Path",
    "description": "New research reveals two types of SiOx pinholes in TOPCon cells. Passivating pinholes with residual oxygen actually boost efficiency to 26.55%",
    "keywords": "TOPCon solar cell, tunnel oxide passivated contact, passivating pinhole, SiOx pinhole, poly-Si passivation, HAADF-STEM, n-type silicon solar cell",
    "ogType": "website",
    "image": "https://cdn.ooitech.com/static/upload/image/20260717/8f4e05ab43e74a832b2faee10f80bb99.webp",
    "headings": [
        {
            "level": 1,
            "text": "Pinholes in TOPCon Cells: The Surprising Path"
        },
        {
            "level": 2,
            "text": "Pinholes in TOPCon Cells: The Surprising Path"
        },
        {
            "level": 2,
            "text": "Overview"
        },
        {
            "level": 2,
            "text": "Research Background and the Problem That Stuck"
        },
        {
            "level": 2,
            "text": "Mechanism: Two Types of Pinhole (Figure 2)"
        },
        {
            "level": 3,
            "text": "Key point: the pinholes on the high-efficiency wafer are actually smaller, and retain oxygen better. All sizes are an order of magnitude smaller than earlier literature reported."
        },
        {
            "level": 2,
            "text": "Process Landing Point: Two-Step Oxidation plus Back Polishing plus Poly Triple Coupling"
        },
        {
            "level": 2,
            "text": "Performance Comparison (Fig. 4 Hard Data)"
        },
        {
            "level": 2,
            "text": "One Line for the Industry"
        },
        {
            "level": 2,
            "text": "Ooitech's View"
        },
        {
            "level": 5,
            "text": "Tags :"
        },
        {
            "level": 5,
            "text": "Table of Contents"
        },
        {
            "level": 5,
            "text": "Category"
        },
        {
            "level": 5,
            "text": "Related Posts"
        },
        {
            "level": 6,
            "text": "TOPCon Solar Cell Manufacturing Process: Step-by-Step"
        },
        {
            "level": 6,
            "text": "Tabber Stringer Machine Manufacturer: How to Vet One"
        },
        {
            "level": 6,
            "text": "Triple-Junction GaAs Solar Cell — Structure and Gains"
        },
        {
            "level": 6,
            "text": "26.2% Certified Efficiency Breakthrough"
        },
        {
            "level": 6,
            "text": "33.25% Efficiency, 96% MPPT Retention After 1000 Hours:"
        },
        {
            "level": 5,
            "text": "Recent Post"
        },
        {
            "level": 6,
            "text": "Can I Make My Own Solar Panels at Home? What Is Actually Possible"
        },
        {
            "level": 6,
            "text": "Why Do So Many Solar Companies Go Out of Business?"
        },
        {
            "level": 6,
            "text": "What Happens After 25 Years of Solar Panels? Reuse and Recycling"
        },
        {
            "level": 5,
            "text": "Popular Tags"
        },
        {
            "level": 3,
            "text": "Request A Quote"
        },
        {
            "level": 2,
            "text": "We deliver expertise you can trust our service"
        },
        {
            "level": 3,
            "text": "Cost-Effective Advantages"
        },
        {
            "level": 3,
            "text": "Our Experience Team"
        },
        {
            "level": 3,
            "text": "15+ Years Industry Experience"
        },
        {
            "level": 2,
            "text": "What Our Client Say's about us"
        },
        {
            "level": 3,
            "text": "Amjad"
        },
        {
            "level": 3,
            "text": "Diarra From Africa"
        },
        {
            "level": 3,
            "text": "Mark"
        },
        {
            "level": 3,
            "text": "KTECH"
        },
        {
            "level": 3,
            "text": "Jizzakh Polytechnic Institute"
        },
        {
            "level": 2,
            "text": "Our Latest Products"
        },
        {
            "level": 3,
            "text": "CHT9951A Hipot Insulation Tester: 0.1-10kV DC"
        },
        {
            "level": 3,
            "text": "Low-Iron Tempered Solar Glass: 93.5% with AR Coating"
        },
        {
            "level": 3,
            "text": "SC-10C Full Automatic Silicon Wafer Laser Cutting"
        },
        {
            "level": 3,
            "text": "Frame Gluing & J-Box Glue Machine: 2500mm Stroke"
        },
        {
            "level": 3,
            "text": "DH200-Y Automatic Bussing Machine: 17s Cycle Time"
        },
        {
            "level": 3,
            "text": "Solar Junction Box and Diode Box — IP67/IP68 Rated"
        }
    ],
    "wordCount": 2133,
    "markdown": "# Pinholes in TOPCon Cells: The Surprising Path\n\n> New research reveals two types of SiOx pinholes in TOPCon cells. Passivating pinholes with residual oxygen actually boost efficiency to 26.55%\n\n![Pinholes in TOPCon Cells: The Surprising Path](https://cdn.ooitech.com/static/upload/image/20260717/8f4e05ab43e74a832b2faee10f80bb99.webp)\n\n- ** 2026-07-17\n- ** 213 Views\n- ** [Blog](./Blog.html)\n\n## Pinholes in TOPCon Cells: The Surprising Path\n\n**Quick answer:** Research on TOPCon cells has found that deliberately leaving a controlled amount of thin oxide can improve passivation rather than degrade it, which reverses a long-held assumption. The study measured oxide layers in the range of 0.2 nm and 0.3 nm against a reference at 1.7 nm, and found that the thinner, deliberately retained oxide did not simply add resistance. The tunnel oxide in a TOPCon cell has to be thin enough for carriers to tunnel through and thick enough to passivate the surface, and the conventional target sits at one or two nanometres. What the result suggests is that the boundary is less sharp than assumed, and that the chemical state of the interface matters as much as the thickness. For a production line, that shifts attention toward interface control rather than thickness alone.\n\nPV Module Manufacturing · by Jerry, Ooitech\n\n## Overview\n\nHere is something that flips a long-held assumption in silicon PV. Researchers found that deliberately leaving certain \"pinholes\" in the SiOx layer of a [TOPCon](https://www.ooitech.com/what-is-topcon-solar-cell-a-complete-guide-to-tunnel-oxide-passivated-contact-technology.html) cell can push efficiency up to 26.55%, instead of dragging it down.\n\nThe key finding: pinholes in the tunnel oxide split into two families. One is the recombination type (oxygen-depleted, where poly-Si contacts c-Si directly, bad), the other is the passivating type (residual oxygen stays behind, passivating dangling bonds while still allowing tunneling, good). The passivating type measures about 1.6 ± 0.2 nm × 1.4 ± 0.3 nm in cross-section, with an areal density of 2 × 10¹² cm⁻². A Fischer model showed that what decides device performance is not pinhole geometry, but whether the pinhole is passivated.\n\nReference: *Passivating pinholes for large-area and high-efficiency silicon solar cells with tunnel oxide passivated contact*, Nat Commun 17, 2490 (2026). [https://doi.org/10.1038/s41467-026-70511-2](https://doi.org/10.1038/s41467-026-70511-2)\n\n## Research Background and the Problem That Stuck\n\nTOPCon is now the mainstream for n-type silicon. Runergy hit 26.55% on 335 cm², Jinko stacked TOPCon plus perovskite to 33.24%, and single-side n-TOPCon has a theoretical ceiling of 27.79%. But nobody had pinned down what role the pinholes in that interfacial SiOx layer actually play.\n\nThe traditional view: pinhole means poly-Si pokes straight into c-Si, oxygen passivation fails, bad news.\n\nThe reality is messier. Oxide too thick (>1.7 nm) passivates well but tunnels poorly, so FF collapses. Oxide too thin (<1.3 nm) means more pinholes, and now you worry about Voc collapsing.\n\nThe authors broke oxide thickness plus oxygen distribution into three cases (the Introduction section):\n\n- Case 1: thick oxide, passivation OK, tunneling not optimal\n- Case 2: thin oxide plus oxygen depletion, giving recombination-type pinholes (the classic \"bad pinhole\")\n- Case 3: thin oxide but oxygen still seeps into the pinhole, giving passivating-type pinholes (the new finding here)\n\nBefore this, HR-TEM resolution wasn't good enough to see features below 2 nm. Literature reported pinhole diameters of 5 nm to 200 nm and densities of 10⁶ to 10⁸ cm⁻², which were all just \"big holes\". Selective etching and c-AFM rely on the etch rate difference between Si and SiOx, so regions with residual oxygen simply don't etch open. Passivating pinholes were naturally screened out by these methods. That's why Case 3 went unseen for so long.\n\n## Mechanism: Two Types of Pinhole (Figure 2)\n\nAberration-corrected HAADF-STEM (JEM ARM200F plus Spectra 300, 200/300 kV) scanned the poly-Si/SiOx/c-Si interface on a high-efficiency wafer (25.40%) and a low-efficiency control (24.07%).\n\n| Type | Oxygen state | Size (high/low efficiency) | EELS O-K edge |\n| --- | --- | --- | --- |\n| Recombination | Oxygen-depleted, poly/c-Si lattice directly joined | Low-efficiency wafer ~1.37 × 1.35 nm | Deep oxygen valley |\n| Passivating | Residual oxygen present, dangling bonds passivated | High-efficiency wafer 1.55 × 1.25 nm | Oxygen signal still visible, shallow oxygen valley |\n\n### Key point: the pinholes on the high-efficiency wafer are actually smaller, and retain oxygen better. All sizes are an order of magnitude smaller than earlier literature reported.\n\nThe Fischer point-contact model results (Fig. 3d in the original):\n\n- Pinhole area fraction f = πr²/P², but J₀ is insensitive to f. What really dominates is the surface recombination velocity S at the pinhole.\n- Around f ≈ 0.1, once S ≳ 10³ cm/s, J₀ climbs steeply, and it saturates above S > 10⁵ cm/s.\n- Meaning: the key to high performance isn't \"zero pinholes\", it's \"pinholes that are passivated\". This is the biggest highlight of the whole paper.\n\nOn density, this is a bit of a revolution. Statistics from X-Y orthogonal slicing across 40 wafers (high plus low efficiency) gave 2 × 10¹² cm⁻² for passivating and 3 × 10¹² cm⁻² for recombination pinholes, 4 to 6 orders of magnitude higher than literature values.\n\nThree reasons stack up: first, the concept changed, so previously screened-out passivating nanodefects became visible; second, the samples are industrially optimized wafers above 25%, not test structures; third, the method is atomic-level HAADF, and indirect approaches simply can't see the sub-2 nm oxygen-containing region. To guard against overlap along the beam direction from 50 to 150 nm thick TEM samples, the authors backstopped with 4D-STEM ptychography along the thickness direction, confirming the density statistics aren't distorted by projection overlap.\n\n## Process Landing Point: Two-Step Oxidation plus Back Polishing plus Poly Triple Coupling\n\nThe variables from the original Methods plus SI (Supplementary Table 1):\n\n- Two-step oxidation: first O₂ oxidation into thin SiO₂, then an oxygen-starved step (no oxygen fed in). The passivating type needs longer oxygen flow time, higher temperature, larger flow, and higher pressure, which favors uniform, dense oxide.\n- POCl₃ diffusion: lower deposition temperature plus shorter time improves poly crystallization and suppresses recombination-type pinholes.\n- Back polishing morphology sits upstream of oxide thickness uniformity. All three have to be tuned together to stably produce Case 3.\n\n## Performance Comparison (Fig. 4 Hard Data)\n\nSymmetric double-side poly-Si/SiOx samples (n-Si 1–3 Ω·cm, double-side polished):\n\n- τeff: 8.9 ms high efficiency vs 2.96 ms control (injection 5×10¹⁵ cm⁻³)\n- J₀: 2.6 vs 10.6 fA/cm²\n- ΔVoc measured at 15.9 mV, but the J₀ difference alone explains only ~11 mV. The remaining ~5 mV the authors attribute to improved bulk SRH lifetime. The optimized anneal, while creating passivating pinholes, also getters metal impurities (citing Krügener's 25% POLO work). Fixing both interface and bulk together is the recipe for crossing 25%.\n\nFor FF, the difference mainly comes from Rs:\n\n- Rs: 357 (high efficiency) vs 619 mΩ·cm² (control), Suns-Voc measured\n- ρc (TLM): 4.6 vs 5.4 mΩ·cm²\n\nThe counterintuitive point: by \"denser pinholes lower ρc\" logic, more passivating pinholes on the high-efficiency wafer should mean lower ρc, and indeed 4.6 < 5.4. But the authors add a twist. Near recombination-type pinholes, phosphorus diffuses into the wafer, while passivating types are blocked by oxygen (the EDS doping profile in Supplementary Fig. 10). So doping profile and contact resistance follow two separate logics, and you can't explain them by pinhole density alone.\n\nPL was uniform across the full wafer, and Corescan mapping of Voc distribution also held up for large-area uniformity.\n\n## One Line for the Industry\n\nThis paper pushes the TOPCon interface from a binary story of \"intact oxide vs pinhole leakage\" to a ternary one: \"pinholes can be good too, as long as oxygen is still there\". What the industry needs to do next isn't to obsess over zero pinholes, but to tune the back polishing to oxidation to poly deposition chain so that pinholes carry oxygen. Daheng's wafer at 25.40% on 333.3 cm² has already proven the road works.\n\n## Ooitech's View\n\nWhat strikes us here is how much of this hinges on the process chain, not just the cell design. That two-step oxidation, POCl₃ tuning, and back polishing all have to move together is exactly the kind of coupling that gets lost when a line is assembled piecemeal. On the module side we see the same pattern, where lamination and stringing tolerances quietly decide whether a good cell keeps its Voc. If you want a closer look at how these interface-sensitive processes translate onto a real production floor, our factory walkthroughs on YouTube ([www.youtube.com/ooitech](http://www.youtube.com/ooitech)) are worth a subscribe.\n\n---\n\n##### Tags :\n\n![](/template/ooitech/assets/img/shape/06.png)\n\n![](https://cdn.ooitech.com/runtime/image/w800_h700_fitblur_v2_w800_h700_fitblur_v2_1757399770541443.webp)\n\n### Request A Quote\n\nAll uploads are secure and confidential.\n\n## We deliver expertise you can trust our service\n\nDirect-from-Factory Equipment.\n\n![](/template/ooitech/assets/img/icon/money-2.svg)\n\n### Cost-Effective Advantages\n\nWe deliver exceptional value, maximizing results while optimizing budgets for clients.\n\n![](/template/ooitech/assets/img/icon/staff.svg)\n\n### Our Experience Team\n\nOur skilled professionals specialize in innovative solutions and tailored strategies.\n\n![](/template/ooitech/assets/img/icon/certified.svg)\n\n### 15+ Years Industry Experience\n\nDeep expertise ensures reliable, trend-aware, and proven outcomes for success.\n\n![](https://cdn.ooitech.com/static/upload/image/20250910/1757477357667605.webp )\n\n![](https://cdn.ooitech.com/static/upload/image/20250910/1757477724911512.webp)\n\n![](/template/ooitech/assets/img/shape/06.png)\n\n## What Our Client Say's about us\n\nClient testimonials praise our deep understanding of their challenges, which leads to innovative solutions and strong ROI. Long-term collaborations—some over a decade—demonstrate their trust and satisfaction. Their success stories drive us to continually exceed expectations. [Know More **](#quote-form)\n\n![](/template/ooitech/assets/img/icon/quote.svg)\n\nThanks to Ooitech for providing the fully automated production equipment—your installation and after-sales service have been excellent.\n\n![](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_2026041720921238.webp)\n\n### Amjad\n\n![](/template/ooitech/assets/img/icon/quote.svg)\n\nthank you for ooitech's professional support and on time after service.\n\n![](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1784509010217979.webp)\n\n### Diarra From Africa\n\n![](/template/ooitech/assets/img/icon/quote.svg)\n\nThank you again so much again for the very big big help for improving and fixing the factory and also teaching the workers how to use the machines\n\n![](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1757479675272137.webp)\n\n### Mark\n\nBIPV Philippines\n\n![](/template/ooitech/assets/img/icon/quote.svg)\n\nThanks to Ooitech for providing highly suitable BC solar cell experimental equipment.\n\n![](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1776426122864564.webp)\n\n### KTECH\n\n![](/template/ooitech/assets/img/icon/quote.svg)\n\nA man with a big soul. Thank you very much for your visit Mr Wu. Thank you very much for the services provided in installing equipment and training my students. The kindest person and professional in his field\n\n![](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_2026041716444445.webp)\n\n### Jizzakh Polytechnic Institute\n\n## Our Latest Products\n\n![CHT9951A Hipot Insulation Tester: 0.1-10kV DC](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1774601338282260.webp)\n\n- [** Rachael](./cht9951a-cht9951b-solar-panel-hipot-insulation-resistance-tester-pv-module-safety-testing-equipment.html)\n- [** 58789](./cht9951a-cht9951b-solar-panel-hipot-insulation-resistance-tester-pv-module-safety-testing-equipment.html)\n\n### CHT9951A Hipot Insulation Tester: 0.1-10kV DC\n\nCHT9951A/CHT9951B hipot and insulation resistance tester for solar PV module testing. DC output up to 10kV, insulation resistance up to 99GΩ\n\n![Low-Iron Tempered Solar Glass: 93.5% with AR Coating](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1774514074283403.webp)\n\n- [** ooitech](./Solar-Glass-Ultra-Clear-Low-Iron-Tempered-Glass-for-Photovoltaic-Modules.html)\n- [** 47410](./Solar-Glass-Ultra-Clear-Low-Iron-Tempered-Glass-for-Photovoltaic-Modules.html)\n\n### Low-Iron Tempered Solar Glass: 93.5% with AR Coating\n\nSolar tempered glass for PV modules: ultra-clear low-iron glass with anti-reflective coating, reaching 91.5%+ light transmittance in G1/M6/M10/M12 sizes.\n\n![SC-10C Full Automatic Silicon Wafer Laser Cutting](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1774340166130021.webp)\n\n- [** ooitech](./SC-10C-Full-Automatic-Silicon-Wafer-Laser-Cutting-Machine-High-Precision-Solar-Cell-Production-Equipment.html)\n- [** 30075](./SC-10C-Full-Automatic-Silicon-Wafer-Laser-Cutting-Machine-High-Precision-Solar-Cell-Production-Equipment.html)\n\n### SC-10C Full Automatic Silicon Wafer Laser Cutting\n\nSC-10C Full Automatic Silicon Wafer Laser Cutting Machine by Ooitech - High-speed precision cutting equipment for solar cell production with 860PCS/H\n\n![Frame Gluing & J-Box Glue Machine: 2500mm Stroke](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1774497599314364.webp)\n\n- [** Rachael](./automatic-frame-gluing-machine-and-junction-box-glue-machines-ooitech-solar-panel-production-line-equipment.html)\n- [** 51677](./automatic-frame-gluing-machine-and-junction-box-glue-machines-ooitech-solar-panel-production-line-equipment.html)\n\n### Frame Gluing & J-Box Glue Machine: 2500mm Stroke\n\nOoitech offers professional automatic frame gluing machines (SPZ-2400GS-T2-Y2) with American ARO pump and GRACO PCF system\n\n![DH200-Y Automatic Bussing Machine: 17s Cycle Time](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1774348162498246.webp)\n\n- [** Rachael](./automatic-bussing-machine-dh200-y-solar-panel-busbar-soldering-equipment-ooitech.html)\n- [** 87760](./automatic-bussing-machine-dh200-y-solar-panel-busbar-soldering-equipment-ooitech.html)\n\n### DH200-Y Automatic Bussing Machine: 17s Cycle Time\n\nOoitech DH200-Y Automatic Bussing Machine delivers high-speed electromagnetic busbar soldering with 17s cycle time\n\n![Solar Junction Box and Diode Box — IP67/IP68 Rated](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_2026032739568544.jpg.webp)\n\n- [** Rachael](./Solar-Junction-Box-J-Box-Advanced-PV-Module-Protection-Power-Management-System.html)\n- [** 15415](./Solar-Junction-Box-J-Box-Advanced-PV-Module-Protection-Power-Management-System.html)\n\n### Solar Junction Box and Diode Box — IP67/IP68 Rated\n\nSolar junction box and diode box with bypass diodes rated IP67/IP68: hot-spot protection, MC4 connectors and optional monitoring for your module current.\n",
    "endpoints": {
        "html": "https://www.ooitech.com/pinholes-in-topcon-cells-the-surprising-path-to-26-55-efficiency.html",
        "markdown": "https://www.ooitech.com/pinholes-in-topcon-cells-the-surprising-path-to-26-55-efficiency.md",
        "agentManifest": "https://www.ooitech.com/.well-known/agent.json",
        "llmsTxt": "https://www.ooitech.com/llms.txt",
        "sitemap": "https://www.ooitech.com/sitemap.xml",
        "quote": "https://m.ooitech.com/api/quote.php"
    }
}