{
    "schemaVersion": "ooitech-article.v1",
    "url": "https://www.ooitech.com/how-silver-paste-bites-through-poly-si-on-the-topcon-rear-side.html",
    "language": "en",
    "title": "How Silver Paste \"Bites Through\" poly-Si on th··· | Ooitech",
    "description": "A deep dive into how rear silver paste penetrates poly-Si on TOPCon cells, why single-layer poly-Si fails to stop it, and how the new bilayer poly-Si design gives silver a",
    "keywords": "TOPCon rear metallization, poly-Si silver penetration, tunnel oxide passivation, bilayer poly-Si, silver diffusion, passivated contact, screen printing silver paste",
    "ogType": "website",
    "image": "https://cdn.ooitech.com/static/upload/image/20250723/1753270698863235.webp",
    "headings": [
        {
            "level": 1,
            "text": "How Silver Paste \"Bites Through\" poly-Si on the TOPCon Rear Side"
        },
        {
            "level": 3,
            "text": "How Silver Paste \"Bites Through\" poly-Si on the TOPCon Rear Side"
        },
        {
            "level": 5,
            "text": "Introduction"
        },
        {
            "level": 5,
            "text": "Look at the Rear-Side Layout First"
        },
        {
            "level": 6,
            "text": "What the rear stack actually looks like"
        },
        {
            "level": 5,
            "text": "Single-Layer poly-Si — Why It Can't Hold the Line"
        },
        {
            "level": 5,
            "text": "Bilayer Design: Not Blocking It Dead, but Leaving a Door"
        },
        {
            "level": 5,
            "text": "Payoff, Cost, and Where It Sits in the Industry"
        },
        {
            "level": 5,
            "text": "One Table to Make It Clear"
        },
        {
            "level": 5,
            "text": "Three Lines to Take Back to the Line Crew"
        },
        {
            "level": 5,
            "text": "Ooitech's View"
        },
        {
            "level": 5,
            "text": "Tags :"
        },
        {
            "level": 5,
            "text": "Table of Contents"
        },
        {
            "level": 5,
            "text": "Category"
        },
        {
            "level": 5,
            "text": "Related Posts"
        },
        {
            "level": 6,
            "text": "TOPCon Solar Cell Manufacturing Process: A Complete Step-by-Step Guide"
        },
        {
            "level": 6,
            "text": "How a Tabber & Stringer Works — and How to Choose One in 2026"
        },
        {
            "level": 6,
            "text": "Triple-Junction GaAs Solar Cells: A Detailed Look at the Mainstream Space Photovoltaic Structure"
        },
        {
            "level": 6,
            "text": "33.25% Efficiency, 96% MPPT Retention After 1000 Hours: All-ALD SnOx/AZO Bilayer Suppresses Interface Reactions in Perovskite/Silicon Tandems"
        },
        {
            "level": 6,
            "text": "26.2% Certified Efficiency Breakthrough in Large-Area All-Perovskite Tandem Modules: The In₂O₃ Nanocrystal Tunnel Recombination Junction"
        },
        {
            "level": 5,
            "text": "Recent Post"
        },
        {
            "level": 6,
            "text": "Not Every Laminate Bubble Is the Encapsulant's Fault: The Real Causes Behind Solar Module Bubbles"
        },
        {
            "level": 6,
            "text": "What Counts as a Truly Lightweight Solar Module? A Look at Rigid-Light Panels"
        },
        {
            "level": 6,
            "text": "Thinner Silicon Wafers vs. 25-30 Year Module Life: Can Both Survive?"
        },
        {
            "level": 5,
            "text": "Popular Tags"
        },
        {
            "level": 3,
            "text": "Request A Quote"
        },
        {
            "level": 2,
            "text": "We deliver expertise you can trust our service"
        },
        {
            "level": 3,
            "text": "Cost-Effective Advantages"
        },
        {
            "level": 3,
            "text": "Our Experience Team"
        },
        {
            "level": 3,
            "text": "15+ Years Industry Experience"
        },
        {
            "level": 2,
            "text": "What Our Client Say's about us"
        },
        {
            "level": 3,
            "text": "Diarra From Africa"
        },
        {
            "level": 3,
            "text": "Amjad"
        },
        {
            "level": 3,
            "text": "KTECH"
        },
        {
            "level": 3,
            "text": "Jizzakh Polytechnic Institute"
        },
        {
            "level": 3,
            "text": "Mark"
        },
        {
            "level": 2,
            "text": "Our Latest Products"
        },
        {
            "level": 3,
            "text": "Full Automatic Solar Panel Production Line Equipment | Ooitech"
        },
        {
            "level": 3,
            "text": "Interconnection Busbar – Solar Cell String Current Collection"
        },
        {
            "level": 3,
            "text": "BD03 Frame Gluing Machine – Aluminum Frame Sealant System"
        },
        {
            "level": 3,
            "text": "Portable HD EL Tester for Solar Module Inspection Portable EL tester"
        },
        {
            "level": 3,
            "text": "Automatic Tape Sticking Machine for Solar Panel Production Line | Ooitech"
        },
        {
            "level": 3,
            "text": "Automatic Layup & Bussing Integrated Machine SAW-100A | Solar Panel Production Equipment | Ooitech"
        }
    ],
    "wordCount": 2662,
    "markdown": "# How Silver Paste \"Bites Through\" poly-Si on th··· | Ooitech\n\n> A deep dive into how rear silver paste penetrates poly-Si on TOPCon cells, why single-layer poly-Si fails to stop it, and how the new bilayer poly-Si design gives silver a\n\n![How Silver Paste](https://cdn.ooitech.com/static/upload/image/20260902/53eafcaf488a6278ffff7ea894bf8d5d.webp)\n\n- ** 2026-09-02\n- ** 3 Views\n- ** [Blog](/Blog.html)\n\n### How Silver Paste \"Bites Through\" poly-Si on the TOPCon Rear Side\n\n##### Introduction\n\nLast time we talked about front-side silver paste. The whole point there was \"burn it through.\" [Why can one laser process force the entire front-side silver paste to be replaced?](https://mp.weixin.qq.com/s?__biz=MzkwOTQwMTI1Ng==&mid=2247488486&idx=1&sn=43796068eea44f16d034c6f89db0c2e8&scene=21#wechat_redirect)\n\nThe rear side is exactly the opposite.\n\n**Silver still has to go in. But once it's in, it has to stop right away.**\n\nBecause on the front, if silver doesn't burn in, contact resistance won't come down. On the rear, if silver burns too deep, it punches straight through the most valuable part of TOPCon — the passivated contact.\n\nSo front-side metallization is about \"how to get in.\" Rear-side metallization is about \"how to stop once you're in.\"\n\nThis piece breaks the rear side down all the way: why silver \"bites through\" poly-Si, what happens once it does, and how the latest bilayer poly-Si design builds silver a road that says \"stop on arrival.\"\n\n##### Look at the Rear-Side Layout First\n\n###### What the rear stack actually looks like\n\nFrom the outside in, the TOPCon rear is stacked roughly like this: SiNx protective layer, (some makers run dual-side ALD and add an AlOx layer on the rear too), poly-Si, tunnel oxide, and underneath that sits the n-type silicon substrate.\n\nThe biggest difference from the front is that bottom layer — the tunnel oxide, only about 1–1.5 nm thick. It's the lifeline of the whole rear-side passivation. The entire passivation value of poly-Si rides on this film staying intact.\n\nThe job boundary of rear silver paste is different from the front too. Burning through the SiNx protective layer can't be skipped — that's the entry ticket, same as the front. But its contact target lives inside the poly-Si. Poly-Si is heavily doped, it's a conductive layer by itself. Once silver reaches the poly-Si and forms contact, the job is done.\n\n**Then it has to stop.**\n\nIf silver keeps going down, through the tunnel oxide and into the silicon substrate — the passivated contact is dead on the spot. Recombination centers show up across the interface, Voc drops, and the foundation of this cell is ruined.\n\nA production-line side note: that rear AlOx layer is still optional right now, and plenty of makers skip it. But as rear poly finger and other localized structures develop, the passivation demand in non-metallized regions will keep climbing, and dielectric passivation layers like AlOx will clearly matter more. **So a film layer that looks \"optional\" today may actually be reserving an interface for the next-gen localized poly-Si structure.** Read that evolution, and you see the rear film design is paving the road for the next step.\n\n##### Single-Layer poly-Si — Why It Can't Hold the Line\n\nFirst, how silver \"bites\" its way in.\n\nThe front-side piece covered it: during firing, silver dissolves into the molten glass phase and migrates along with the glass. On the rear, this same mechanism keeps running — the difference is that the front-side emitter welcomes silver spikes stabbing in, while the rear poly-Si can't tolerate silver going any deeper.\n\nThe problem with single-layer poly-Si is structural: it's built up from grains, and the grain boundaries run all the way top to bottom. **Grain boundaries are a key fast channel for silver to migrate into the depths of poly-Si.**\n\nOnce silver migrates down along the grain boundaries and reaches near the tunnel oxide, it can further trigger local damage or form a metal penetration path, finally carrying silver into the silicon substrate — and from that moment, the physical basis of the passivated contact is gone.\n\nThis isn't speculation, it's a documented observation. In the 26.66% paper published in *Nature Energy* by Ningbo Institute of Materials and JinkoSolar, HAADF and HR-TEM gave the firing interface of a single-layer poly-Si sample a full physical exam: silver nanoparticles appeared scattered inside the silicon substrate, with silver traces running all the way from poly-Si into the substrate. The tunnel oxide itself was still intact, but it didn't hold the silver back — a single barrier can't stop the silver pouring down along the grain boundaries.\n\n##### Bilayer Design: Not Blocking It Dead, but Leaving a Door\n\nThe counter-intuitive part of the paper's solution: **instead of blocking silver dead, they built silver a road that says \"stop on arrival.\"**\n\nThe rear was made with two poly-Si layers, about 100 nm total, each doing its own job. **This describes the specific bilayer structure used in the paper. Not every bilayer poly-Si follows this fixed 60/40 nm, heavy-doped/light-doped configuration.**\n\n**Outer layer, 60 nm, heavily doped, mostly amorphous — the reception hall.** Lots of grain boundaries, high phosphorus concentration, silver walks in freely. Once it reaches position, it forms an ohmic contact with the heavily doped poly-Si. This is the \"conduct\" role: contact must form, current must come out.\n\n**Inner layer, 40 nm, lightly doped, highly crystalline — the gate.** High crystallinity, low grain boundary density, silver has nowhere to go once it gets here. This is the structural layer doing the \"blocking.\"\n\n**Tunnel oxide — the last chemical barrier.** It's not just physically thin. More importantly, it changes the interface conditions for silver to keep migrating toward the silicon substrate and to form a stable metal phase. When silver is stopped near the highly crystalline poly-Si and the SiOx interface, forming a metal penetration path down to the substrate becomes much harder.\n\nSo the real \"brake\" isn't done by any single layer alone. It's the **highly crystalline poly-Si + tunnel oxide** together that make up the final line of defense.\n\nThe HR-TEM comparison makes it vivid: in the single-layer sample, silver penetrates into the substrate as scattered dots. In the bilayer sample, after silver has punched through most of the outer layer, it gets forced by the inner layer into a \"bowl shape\" — it spreads sideways but can't go down anymore.\n\nThe effect is direct too: implied open-circuit voltage went from 752 mV up to 757 mV. **Behind that 5 mV gain is one core fact — silver penetration was clearly suppressed, and the passivation was preserved.** This 5 mV wasn't \"made,\" it was saved — voltage that would otherwise have been lost.\n\nOne line to sum up this design: the wisdom of blocking silver isn't in \"plugging,\" it's in \"layering\" — the greeters greet, the gatekeepers keep the gate. The outer layer handles making contact, the inner layer holds the bottom line, and the tunnel oxide backs up the last stop.\n\n##### Payoff, Cost, and Where It Sits in the Industry\n\nFirst the payoff: Voc,i +5 mV. The rear-side pillar of that 26.66% certified efficiency is exactly this bilayer structure.\n\nNow the cost, straight up: one more deposition, one more interface. The added process complexity and cost are real. And the paper itself admits the outer layer didn't stop 100% of the silver — that last gate relies on the combination of inner-layer poly-Si plus the tunnel oxide.\n\nOn the industry map, this isn't a one-off. JinkoSolar's earlier certified 26.35% bifacial TOPCon used exactly a bilayer SiOx/poly-Si structure plus UV picosecond laser selective modification. And more than one academic team is working on Bilayered and Triple-layer poly-Si. **Functional layering of poly-Si is the direction the industry is heading** — behind it is the same logic: peel the two jobs of \"contact\" and \"passivation\" off a single film, and hand each to its own layer.\n\nWorth drawing a distinction here: even with the same bilayer poly-Si, the two recent records use it differently. In the Jinko 26.35% paper (Yangzhou University + Jinko, EES), the bilayer structure paired UV picosecond laser modification with wet etching to selectively thin the outer poly-Si in the rear non-metallized region — the goal was to cut parasitic absorption and lift bifaciality. That's an \"optics problem.\" The Ningbo 26.66% paper aims the bilayer structure at blocking silver and preserving passivation. That's an \"electrical problem.\" Bilayer poly-Si is like a platform — different teams solve different problems on it, but the direction is the same: let each layer do just one thing. In Ye Jichun's team's own list of the next-stage efficiency levers for TOPCon, bilayer poly-Si structures and localized polysilicon (poly finger) sit right up front — this *Nature Energy* paper just turned the first item on that list into a record.\n\nStill have to throw some cold water: these records were all made on lab equipment, the papers say so themselves. From lab to mass-production line, yield, cycle time, cost — every gate has to be cleared again.\n\n##### One Table to Make It Clear\n\n| Item | Front Side | Rear Side |\n| --- | --- | --- |\n| Metal faces | Multiple dielectric films + emitter | SiNx + poly-Si + SiOx |\n| Biggest problem | Silver won't burn in | Silver burns too deep |\n| Traditional fix | Add aluminum to boost contact | Single-layer poly-Si direct contact |\n| New problem | Aluminum harms passivation | Silver penetrates poly-Si |\n| New solution | LECO + aluminum-free silver paste | Bilayer poly-Si |\n| Core idea | Burn in precisely | Stop precisely |\n\n##### Three Lines to Take Back to the Line Crew\n\n**First, the rear-side disease and the front-side disease show up on two different parameters.** When the front goes wrong, it usually shows in FF (contact resistance). When the rear goes wrong, it usually shows in Voc (passivation punched through). When you're chasing a Voc anomaly, besides checking the passivation process, firing temperature and poly-Si structure should both be on the list.\n\n**Second, how far silver travels is decided by structure. Firing only controls the throttle.** How deep silver goes — the upstream is the poly-Si structure design: single or bilayer, high or low crystallinity, doping concentration gradient. The firing window only controls the speed on that track. If the structure doesn't provide a line of defense, no amount of fine firing tuning will save it.\n\n**Third, layering is the trend. Watch the supporting stack closely.** Functional layering of poly-Si, rear poly finger, AlOx going from optional to mandatory — these evolutions are all tied together. When you plan a process, don't just look at a single step, look at the direction the structure is evolving.\n\nSo the real efficiency lever in TOPCon metallization isn't burning the silver \"harder,\" it's knowing where the silver should end up.\n\nFront side: let it get in precisely. Rear side: let it stop precisely.\n\n**And the next step forward is making the silver itself less and less.**\n\n##### Ooitech's View\n\nThe part that always bites us on the shop floor is that Voc problems rarely trace back to a single knob. A rear Voc that won't recover no matter how you tune the firing window is usually a structure story, not a paste story — and bilayer poly-Si is basically the industry admitting that. Worth remembering these numbers still come off lab tools, so the leap to a real line is where yield and cycle time do the talking. If you like this kind of cell-level teardown, the YouTube channel at [www.youtube.com/ooitech](http://www.youtube.com/ooitech) has more from inside real module lines.\n\n---\n\n##### Tags :\n\n\n![](/template/ooitech/assets/img/shape/06.png)\n\n![](https://cdn.ooitech.com/runtime/image/w800_h700_fitblur_v2_w800_h700_fitblur_v2_1757399770541443.webp)\n\n### Request A Quote\n\nAll uploads are secure and confidential.\n\n## We deliver expertise you can trust our service\n\nDirect-from-Factory Equipment.\n\n![](/template/ooitech/assets/img/icon/money-2.svg)\n\n### Cost-Effective Advantages\n\nWe deliver exceptional value, maximizing results while optimizing budgets for clients.\n\n![](/template/ooitech/assets/img/icon/staff.svg)\n\n### Our Experience Team\n\nOur skilled professionals specialize in innovative solutions and tailored strategies.\n\n![](/template/ooitech/assets/img/icon/certified.svg)\n\n### 15+ Years Industry Experience\n\nDeep expertise ensures reliable, trend-aware, and proven outcomes for success.\n\n![](https://cdn.ooitech.com/static/upload/image/20250910/1757477357667605.webp )\n\n![](https://cdn.ooitech.com/static/upload/image/20250910/1757477724911512.webp)\n\n![](/template/ooitech/assets/img/shape/06.png)\n\n## What Our Client Say's about us\n\nClient testimonials praise our deep understanding of their challenges, which leads to innovative solutions and strong ROI. Long-term collaborations—some over a decade—demonstrate their trust and satisfaction. Their success stories drive us to continually exceed expectations. [Know More **](#quote-form)\n\n![](/template/ooitech/assets/img/icon/quote.svg)\n\nthank you for ooitech's professional support and on time after service.\n\n![](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1784509010217979.webp)\n\n### Diarra From Africa\n\n![](/template/ooitech/assets/img/icon/quote.svg)\n\nThanks to Ooitech for providing the fully automated production equipment—your installation and after-sales service have been excellent.\n\n![](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_2026041720921238.webp)\n\n### Amjad\n\n![](/template/ooitech/assets/img/icon/quote.svg)\n\nThanks to Ooitech for providing highly suitable BC solar cell experimental equipment.\n\n![](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1776426122864564.webp)\n\n### KTECH\n\n![](/template/ooitech/assets/img/icon/quote.svg)\n\nA man with a big soul. Thank you very much for your visit Mr Wu. Thank you very much for the services provided in installing equipment and training my students. The kindest person and professional in his field\n\n![](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_2026041716444445.webp)\n\n### Jizzakh Polytechnic Institute\n\n![](/template/ooitech/assets/img/icon/quote.svg)\n\nThank you again so much again for the very big big help for improving and fixing the factory and also teaching the workers how to use the machines\n\n![](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1757479675272137.webp)\n\n### Mark\n\nBIPV Philippines\n\n## Our Latest Products\n\n![Full Automatic Solar Panel Production Line Equipment | Ooitech](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1774401482439949.webp)\n\n- [** Rachael](/full-automatic-solar-panel-production-line-equipment-ooitech.html)\n- [** 98453](/full-automatic-solar-panel-production-line-equipment-ooitech.html)\n\n### Full Automatic Solar Panel Production Line Equipment | Ooitech\n\nOoitech full automatic solar panel production line covers glass loading, EVA laying, string layout, tape sticking, lamination, trimming, framing, junction box soldering, gluing, grinding, testing and sorting. Compatible with PERC, TOPCon, IBC, bifacial, h\n\n![Interconnection Busbar – Solar Cell String Current Collection](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_2026032713037538.jpg.webp)\n\n- [** Rachael](/Interconnection-Busbar-for-Solar-Module-Assembly-High-Performance-Current-Collection-Solution.html)\n- [** 96593](/Interconnection-Busbar-for-Solar-Module-Assembly-High-Performance-Current-Collection-Solution.html)\n\n### Interconnection Busbar – Solar Cell String Current Collection\n\nPremium interconnection busbar solutions for solar module assembly, featuring high-purity tinned copper construction, optimized cross-sectional design for minimal power loss, and reliable current collection from cell strings to junction boxes. Essential c\n\n![BD03 Frame Gluing Machine – Aluminum Frame Sealant System](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1774506308732524.webp)\n\n- [** Rachael](/Offline-Frame-Gluing-Machine-BD03-Professional-Aluminum-Frame-Sealant-Application-System.html)\n- [** 51657](/Offline-Frame-Gluing-Machine-BD03-Professional-Aluminum-Frame-Sealant-Application-System.html)\n\n### BD03 Frame Gluing Machine – Aluminum Frame Sealant System\n\nBD03 CNC frame gluing machine – automated aluminum frame sealant application with precise positioning, automatic feeding and uniform glue distribution for solar panel production lines.\n\n![Portable HD EL Tester for Solar Module Inspection Portable EL tester](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_2026051214015103.webp)\n\n- [** ooitech](/portable-hd-el-tester-for-solar-module-inspection.html)\n- [** 428](/portable-hd-el-tester-for-solar-module-inspection.html)\n\n### Portable HD EL Tester for Solar Module Inspection Portable EL tester\n\nPortable high definition EL tester with 24MP auto focus infrared camera for solar module electroluminescence testing, supporting USB and WiFi connection for laboratory and field inspection.\n\n![Automatic Tape Sticking Machine for Solar Panel Production Line | Ooitech](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1774350079476146.webp)\n\n- [** Rachael](/automatic-tape-sticking-machine-for-solar-panel-production-line-ooitech.html)\n- [** 81545](/automatic-tape-sticking-machine-for-solar-panel-production-line-ooitech.html)\n\n### Automatic Tape Sticking Machine for Solar Panel Production Line | Ooitech\n\nOoitech Automatic Tape Sticking Machine applies adhesive tape on solar cell strings with high precision and speed. Features 2 or 4 tape heads, cycle time ≤25s, ±2mm accuracy, MES compatible, fully automatic operation for solar panel production lines.\n\n![Automatic Layup & Bussing Integrated Machine SAW-100A | Solar Panel Production Equipment | Ooitech](https://cdn.ooitech.com/runtime/image/w800_h600_fitblur_v2_1774349342486074.webp)\n\n- [** Rachael](/automatic-layup-and-bussing-integrated-machine-saw-100a-solar-panel-production-equipment-ooitech.html)\n- [** 19447](/automatic-layup-and-bussing-integrated-machine-saw-100a-solar-panel-production-equipment-ooitech.html)\n\n### Automatic Layup & Bussing Integrated Machine SAW-100A | Solar Panel Production Equipment | Ooitech\n\nOoitech SAW-100A Automatic Layup & Bussing Integrated Machine delivers high-efficiency cell string layup and terminal busbar welding with high frequency electromagnetic soldering, mechanical and fiber optic positioning, and capacity up to 15S per grou\n",
    "endpoints": {
        "html": "https://www.ooitech.com/how-silver-paste-bites-through-poly-si-on-the-topcon-rear-side.html",
        "markdown": "https://www.ooitech.com/how-silver-paste-bites-through-poly-si-on-the-topcon-rear-side.md",
        "agentManifest": "https://www.ooitech.com/.well-known/agent.json",
        "llmsTxt": "https://www.ooitech.com/llms.txt",
        "sitemap": "https://www.ooitech.com/sitemap.xml",
        "quote": "https://m.ooitech.com/api/quote.php"
    }
}